2024-09-04
The wire harness tension standard is a specification of the maximum pulling force or tension that a wire harness is required to withstand during installation and use.
2024-09-04
In order to prevent the above quality problems, automotive wiring harness manufacturers should follow the relevant quality management system, such as ISO/TS 16949, for strict quality control and inspe...
2024-09-04
The JAM SJA series is a 2.0 mm pitch wire-to-board crimp type connector that is extremely compact and durable.
2024-09-04
A wiring terminal is a device used for electrical wiring and connections to terminate wires, cables or conductors.
2024-09-04
Amphenol Communications Solutions' compact designs meet the growing demand for miniaturized components.
2024-09-04
A standard power cord is a cable cord used to connect an electrical outlet to an electronic device for the transmission of electrical signals.
2024-09-04
UL certified electronic cables are electronic wire products that have been certified by UL (Underwriters Laboratories).
2024-09-04
Amphenol's HDAS series reduces pitch and increases contact density.
2024-09-04
The Amphenol Communication Solutions family of connectors has a smaller form factor than the existing PwrBlade products.
2024-09-04
The connector is a component that electronic engineers and technicians often come into contact with. Its function is very simple: in the electronic arrangement is blocked or isolated in the electronic...
2024-09-04
The Souriau-Sunbank Clipper series of plastic circular connectors are easy to use and cost effective.
2024-09-04
FCI Basics has added an improved slim-body, single-row contact version to its line of D-Sub connectors.
2024-09-04
Amphenol offers high-performance, ruggedized Quadrax contacts, called FiberQuad, that provide a plug-and-play solution with a fiber optic transmitter or receiver and supporting electronics embedded wi...
2024-09-04
An ideal solution for power-only applications, CUI Devices' USB Type-C socket delivers up to 60 W of power with a current rating of 3 A and a voltage rating of 20 VDC.
2024-09-04
The complete family of Amphenol M28840 circular connectors is designed in accordance with MIL-DTL-28840.
2024-09-04
Jane cow connector introduction electronic information electronic bee optimization Jane cow as the name suggests is a simple horn connector. Its products are widely used in industrial electronics, sec...
2024-09-04
Amphenol Communications Solutions' U10 Series SlimSAS Low-Profile (LP) connectors are used in UPI1.0, 11.2GT/s, 24Gb/s SAS signaling, or 16GT/s PCIe® signaling applications to provide higher speeds an...
2024-09-04
With data rates up to 25 Gbps, the HARTING har-flex HD Card Edge focuses on the data capabilities of the har-flex product family.
2024-09-04
A coaxial connector is an electrical connector used to connect coaxial cables for transmitting high frequency signals and microwave signals. It usually consists of two parts, a plug and a receptacle, ...
2024-09-04
Amphenol Aerospace has developed MIL-HD2 that is compliant with the Sensor Open Systems Architecture™ (SOSA technical standard).
