2024-09-05
Electrical Requirements: Before purchasing an aviation plug, consider the electrical requirements of the product, how much voltage and current is needed. Also consider the resistance and amount of res...
2024-09-05
Aviation plug plating bad situation analysis, skinning, bagging: separation between the plating layer and the base metal. Common reasons are (plating solution PH value is too high, poor pre-treatment ...
2024-09-05
Features of military electrical connector pins,Electrical connector pins are designed to facilitate the installation of electrical connectors and ensure that the insulated wires will not be stripped. ...
2024-09-05
High-voltage wire harnesses can be configured according to different voltage levels for internal and external wiring harness connections of electric vehicles. It is mainly used for signal distribution...
2024-09-05
Prevent mechanical damage. Overhead cables, especially along the wall of the cable, to be covered. Inside the plant to move the Shi project, to apply for the power department granted by the earth movi...
2024-09-05
The power supply and various electrical components in an automobile are physically connected through wiring harnesses, which are divided into low-voltage harnesses and high-voltage harnesses, which ar...
2024-09-05
Wiring harness processing - the law of the harness burned is: in the power system circuit, where the iron, the harness burned to where, burned and intact point of connection, can be considered to be t...
2024-09-05
Surface or internal management of the insulator with metallic excesses. Surface dust. Pollution of solder, etc.; precipitation of organic bonding materials and harmful gases through the adsorption fil...
2024-09-05
Mobile power socket is a kind of installation in the wall or wooden floor within the will not move again part of the power socket, generally speaking household appliances node relatively less, resulti...
2024-09-05
Power connector manufacturers of power connectors have been widely used in electric forklifts, golf carts, sightseeing cars, electric tour boats, electric scrubbers, mining anti-motor vehicles, upsups...
2024-09-05
Computer cable connector is to connect a variety of peripheral devices to the desktop computer mainframe cable, computer cable connector is divided into the display electrode connecting cable, power p...
2024-09-05
The functionality of the equipment is the main issue, and if poor quality RF connectors are used they can lead to reduced performance and slow efficiency. Also poor quality RF connectors can degrade o...
2024-09-05
Waterproof plug manufacturers show that five years ago, the requirements for waterproof plugs in our country were not very large, and not much attention was paid to it. Subsequently, not only the prod...
2024-09-05
Nowadays, many fire accidents around us are due to the misuse of plugs and sockets or quality is not very good and caused, not only to the safety of our lives to produce WeiXie, but also jeopardize th...
2024-09-05
The defects of the waterproof plug is that the linear regulated power supply controller is excellent, it can adjust the working voltage speed, adjust the load, the output noise and harmonic distortion...
2024-09-05
Strictly speaking, USB 3.1 is an updated USB-based transmission standard. Compared to its predecessor, USB 3.0, the new USB 3.1 increases the bandwidth while also dramatically increasing the encoding ...
2024-09-05
The first digit indicates the level of protection against solids and the second digit indicates the level of protection against water.
2024-09-05
Connector safety and reliability is very important, many areas need to use it, with the development of technology, it can cope with a variety of complex environments, in different humidity and tempera...
2024-09-05
When selecting connectors, electrical requirements should also be considered. The rated voltage and current of the selected connector is very important, which is directly related to whether the select...
2024-09-05
Electronic connectors are mainly used in electrical products, it belongs to multiple merging or assembly products, it needs to use to the metal sheet, plastic molding, precision machining and surface ...
