2024-09-04
0.5 mm pitch, horizontal mating style, FPC type male chassis connector with mechanical latch, its main features and advantages are: 1, mechanical latch prevents connector from incomplete mating/non-ma...
2024-09-04
0.3mm pitch, 0.9mm high, top and bottom two contacts, back-locking connector. Its main features and advantages are: 1. 0.3 mm pin pitch, double row connector. 2. Increase FPC retention by using a prop...
2024-09-04
FFC/FPC connectors with a pitch of 0.5mm, with a height of 2.0mm, corresponding to a standard thickness of 0.3mm, and a ZIF method that effectively improves abrasion resistance and insertion/removal l...
2024-09-04
For the first time the circuit board on the wire with a minimum spacing of 1.0mm pressure with the plastic shell locking method to improve the workability, the terminal using a centralized contact met...
2024-09-04
For the first time, a crimping method with a pitch of 1.0mm has been adopted for circuit boards and wires, realizing a miniaturization of approximately 61% compared to conventional products. The doubl...
2024-09-04
1.25mm Pitch, PicoBlade PCB Header, Single Row, Right Angle, Surface Mount, Tin (Sn) Plated, Friction Lock, 2 Circuits, Tape and Reel
2024-09-04
0.5 mm pin pitch, 0.9 mm height, FPC/FFC connectors. The main features and benefits are:1. Low height 0.5mm pin pitch, FPC/FFC connectors.2. Conductive traces on the PCB can be run under the connector...
2024-09-04
0.4mm Pitch, 0.9mm Height, Bottom Contact, Rear Flip/Front Axis™, FPC/FFC Connectors. Key features and benefits are: 1. Rear Flip/Front Axis. 2. Prevents actuator disengagement. 3. FPC/FFC side catche...
2024-09-04
1.0 mm pin pitch, board-to-wire LCD interface connector. The main features and benefits are: 1. high speed data transfer, 2. EMI protection, 3. increased plug/receptacle retention, 4. protection again...
2024-09-04
0.9mm package height of the low profile, thickness of 0.3mm, pitch: 0.5, current: 0.5A, FFC / FPC connectors, its main features and advantages are: 1, space-saving. 2, heat-resistant design is the mos...
